Results 1 to 3 of 3
  1. #1
    Active User Contributing Member KD8MJR's Avatar
    Join Date
    Aug 2014
    Posts
    332
    Blog Entries
    1

    Welcome To The Forum

    Welcome to the Amplifier Forum. I really wanted to start a forum for people who are interested in Amplifiers. I hope that this forum can become a place for people to get good advice on purchasing new and used amplifiers as well as a place to help others with repairs and parts plus the proper usage of their amplifier.

    This forum is new and still under a bit of construction. I have added a few thing to this forum to make it very useful to registered members. I hope you will join in and lets start talking about QRO.

    I have requested that all members use their call sign when registering. It is not a swipe at CBers, I use to be a CBer many years ago. It is just that I have seen on many mixed forums were some people identify themselves and others use handles. Some of the anonymous people tend to be very abusive towards others simply because they are anonymous. This forum is here to help people and not abuse them! Posts will be moderated within reason, I have no problems with heated debates, so long as they do not get too personal.

    73s
    Rob
    KD8MJR

  2. #2
    thank you it's good to see there is more information on this beautifull amplifier

    I have been completly through mine

    see www.bruce449.com/thp/

  3. #3
    Active User Contributing Member KD8MJR's Avatar
    Join Date
    Aug 2014
    Posts
    332
    Blog Entries
    1
    I saw your webpage about a year ago and thought to myself that you were working on an almost impossible job!
    I am really impressed that you were able to repair it and get it to look almost new. Fantastic Job Bruce, that must have taken a lot of work.
    What did you do about the rust on the inside and on the bottom of the case?

    I was looking into that for another ham with a 1.5kfx and found that it requires an acid cleaning followed by zinc plating and then using yellow chromate. (Sounded like loads of work) Did you go that far or did you just sand it off and spray the interior?

    73s
    Rob

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •